VGAsoft logo

VGAsoft | Разработка программного обеспечения

HomeContact us


English ⇔ Russian
 
LMBomber
Dictionary
Speech
Download
Forum

Перевод слова


Перевод: bobbin speek bobbin


[существительное]
катушка ; бобина ; коклюшка ; шпуля ; шпулька ; цевка ; катушка зажигания


Тезаурус:

  1. Near this village at the southern end of Windermere is Stott Park, where a nineteenth-century bobbin mill is preserved by the Department of the Environment, complete with its barns, lathes and a small horizontal steam engine used before electricity was installed.
  2. Of course, if the standard easy-to-use E-core bobbin is dispensed with, there is automatically more room for the windings, so increased copper area is traded for increased difficulty of manufacture.
  3. Wind the wire on neatly in layers and bring the ends out between the pins on each side of the bobbin.
  4. In the second half of the eighteenth century some progress was made, but it was the invention of the bobbin net machine by John Heathcoat ( see Tiverton) in 1808 that provided the foundation for mechanical lace-making.
  5. Some galleries are long, like those at Yew Tree and Monk Coniston, where a great (or walking) spinning wheel could be used, the spinner requiring space to draw her thread away from the great wheel and, turning, to reverse the wheel and walk back to wind the spun yarn on the bobbin.
  6. The greatest concentration of bobbin mills was in the Furness district of what was then north Lancashire, and in the mid-nineteenth century more than fifty mills were at work in the region, making half the bobbins used in the entire textile industry of Britain.
  7. A clip-on bobbin with a Betalight is used at night, with the Optonic of course.
  8. These pins are used to hold the coils on the board; snip off the odd pin on that side of the bobbin which has three pins.
  9. When the ringing subsided, Biff Thacker was standing over her, with Rose at his side, clutching a bobbin, and the machine was still clattering backwards and forwards.
  10. "That's the old bobbin mill down there."
  11. Coil L2 has an inductance of about 170H and is wound on a Ferroxcube FX3720 bobbin which is supplied with two E-cores in grade 3C8 material.
  12. I have tried most of them, apart from the downright ridiculous ones, mainly from curiosity, but still find that a simple clip-on bobbin, or a good butt indicator, is best.
  13. Wind the bobbin with 24-turns of 18s.w.g. enamelled wire, keeping it neatly in layers (there are about 1 layers involved) and bring out the wire ends down through the bobbin slots in the positions shown in Fig. 8.

MAGIA Site Design

    Copyright © 1986-2024 VGAsoft. All rights reserved.

About USPrivacy